Sign in /
Register
   

Activities


LIRA Group of Companies participated in the International Scientific and Technical Forum “Architecture, Design and Construction: Innovative Technologies”
11/22/2023 LIRA Group of Companies participated in the International Scientific and Technical Forum “Architecture, Design and Construction: Innovative Technologies”
The main objective and mission of the forum was to share the experience of scientists in solving urgent problems in the architectural and construction industry and in design, at the state and commercial levels in the conditions of the State of war

LIRA Group of Companies participated in the International Scientific and Technical Forum “Architecture, Design and Construction: Innovative Technologies” held on November 15-16, 2023 in Kyiv National University of Construction and Architecture (KNUCA)

The main objective and mission of the forum was to share the experience of scientists in solving urgent problems in the architectural and construction industry and in design, at the state and commercial levels in the conditions of the State of war

A plenary session was organized during the forum, where the report of the scientific supervisor, D. Sc. Yevzerov I. on "SP LIRA 10 in the restoration and reconstruction of Ukrainian infrastructure" was presented

Thematic conferences were organized within the framework of the forum, during which the reports of our colleagues were also presented. The Executive Director, PhD. Geraymovich Yu. made a report on "Further development of the CROSS-SECTION module in LIRA 10 software package"”, and Leading Engineer, Perepichay I. presented a report on "ВІМ integration in SP LIRA 10"

We would like to express our gratitude to the organizers of the conference for cooperation, the actuality of the content of the presented reports and the opportunity for joint discussion

We wish all those who shared the idea to hold the conference and its participants proper conditions for the development of science, education and society as a whole

photo from International Scientific and Technical Forum «Architecture, Design and Construction: Innovative Technologies»
Lira Group of Companies participated in the 4th International Conference
5/4/2023 Lira Group of Companies participated in the 4th International Conference
Lira Group of Companies is pleased to announce its participation in the 4th International Scientific and Practical Conference

Lira Group of Companies is pleased to announce its participation in the 4th International Scientific and Practical Conference on "Buildings and Structures of Special Purpose: Modern Materials and Constructions." The conference took place on April 26-27, 2023, in Kyiv and was organized by the Ministry of Education and Science of Ukraine, the Ministry of Defense of Ukraine, and the Academy of Construction of Ukraine.

Our company presented a report on the topic "Filtration in Geotechnical Design Problems," where Lead Engineer Irina Perepichai discussed the necessity of conducting filtration calculations in construction projects and provided examples of such calculations using Lira 10 software package. You can find the presentation of the report in the attached file.

We are grateful to the organizers for the opportunity to participate in this event. We take pride in our achievements and are always ready for new challenges!

LIRA Group of Companies took part in the International Scientific and Technical Forum “Architecture and Construction: Restoration of Ukraine
11/29/2022 LIRA Group of Companies took part in the International Scientific and Technical Forum “Architecture and Construction: Restoration of Ukraine
LIRA Group of Companies took part in the International Scientific and Technical Forum “Architecture and Construction: Restoration of Ukraine.

LIRA Group of Companies took part in the International Scientific and Technical Forum “Architecture and Construction: Restoration of Ukraine. Science, Technology, Practice” (2022), on November 17-18,  2022,  in the ONLINE format at the Kyiv National University of Construction and Architecture.

 

Scientific director Evzerov Isaak Danilovich, Doctor of Technical Sciences, made a presentation on the theme “Possibilities of SP LIRA 10 in the reconstruction and recovery of the infrastructure of Ukraine” at the plenary meeting.

 

We thank our partners for the opportunity to make a presentation and gather  together with other scientists from Ukraine and the countries of the European Union, sharing experiences and express opinions on actual problems in the architectural and construction industry, as well as their solution at the state and commercial level under martial law.

 

We must unite our efforts acting as one team and focus all our forces on fighting the external aggressor!

 

The key to our Victiry is Unity!

LIRA Group of Companies took part in the scientific and practical interdisciplinary forum «We will win, we will rebuild!»
7/2/2022 LIRA Group of Companies took part in the scientific and practical interdisciplinary forum «We will win, we will rebuild!»
With laureate of the State Prize of Ukraine for Science and Technology, author of Software Package LIRA 10, Doctor of Technical Sciences Evzerov Isaak Danilovich.

LIRA Group of Companies took part in the scientific and practical interdisciplinary forum «We will win, we will rebuild!» on June 29-30, 2022, in Dnipro city, Ukraine.

 

The event was held with the support of Ministry of Education and Science of Ukraine, Council of Rectors of Higher Education Institutions of Dnepropetrovsk region, SHEI «Prydniprovs'ka State Academy of Civil Engineering and Architecture», The Dnipropetrovs'k region Federation of Employers' Organisations, Academy of Construction of Ukraine.

 

Laureate of the State Prize of Ukraine for Science and Technology, author of Software Package LIRA 10, Doctor of Technical Sciences Evzerov Isaak Danilovich thanked everyone who, in these difficult times, stands together and acts united, mobilizing all the forces to support the country!

 

LIRA Group of Companies continues to work and contribute to the creation of the future. We support the initiative to rebuild the cities of Ukraine and we are ready for cooperation and discussion of organizational and technical solutions to strengthen the defense capability of our country, restore infrastructure, destroyed as a result of military aggression, intensification of further scientific, technical, economic and social development of Ukraine.

 

We must unite our efforts acting as one team and focus all our forces on fighting the external aggressor. We must support our economy, create new employment and work towards a common goal – prosperity of Ukraine and financing of the Armed Forces of Ukraine!

 

We thank the organizers of the SCIENTIFIC AND PRACTICAL FORUM «WE WILL WIN, WE WILL REBUILD!», SHEI Prydniprovs'ka State Academy of Civil Engineering and Architecture», for the opportunity to share experiences and express opinions by gathering together with other representatives of science, education, buildings and industries.

 

The key to our Victiry is Unity!

XII All-Ukrainian Scientific and Technical Conference
9/30/2021 XII All-Ukrainian Scientific and Technical Conference
On September 23-25, 2021, a scientific and technical conference "Construction in seismic regions of Ukraine" was held in Odessa

LIRA Group of Companies took part in the XII All-Ukrainian Scientific and Technical Conference: "Construction in seismic regions of Ukraine", which took place on September 23-25, 2021 in Odessa, Ukraine.

At the sectional session of the conference, reports were presented:

The reports presented at the conference, as well as the main materials of the discussion, will be published in the journal "Science and Construction". The abstracts of the reports are published in the corresponding collection of Odessa State Academy of Civil Engineering and Architecture.

Presentation of the software complex LIRA 10.8
10/12/2018 Presentation of the software complex LIRA 10.8
On the 28th of September, 2018, at State Enterprise of the Ministry of Defence of Ukraine «Central Design Institute» in Kyiv city took place a presentation of SP LIRA 10.8

On the 28th of September, 2018, a seminar entitled

"APPLICATION OF LIRA 10.8 SOFTWARE IN STRUCTURAL ANALYSIS"

took place at State Enterprise of the Ministry of Defence of Ukraine «Central Design Institute» in Kyiv city.

During seminar, new capabilities and implementation features of SP LIRA 10.8 were reviewed and demonstrated. And also recent designing problems and calculation of buildings and structures were discussed.

The following reports were presented at the seminar:

XVI International research and practice conference in Lvov
7/27/2018 XVI International research and practice conference in Lvov
LIRA group of companies are welcoming to take part in the XVI international research-to-practice conference in Lvov

LIRA Group of Companies with the Prydniprovska State Academy of Civil Engineering and Architecture are welcoming you and your colleagues to take part in the XVI international research-to-practice conference:

"Innovative Technologies of Life Cycle of Civil, Industrial and Transport objects"


which will be held on September 4–8, 2018 in the hotel "Valentina" that is located at the following address: Ukraine, Lviv – Briukhovychi, Yasna Street, 7.

The conference will also include a presentation of software LIRA 10.8.

Conditions of participation in the conference are available here.
September 26-28 conference and seminar in Kiev (UPDATED)
7/20/2018 September 26-28 conference and seminar in Kiev (UPDATED)
September 26-27 II International Scientific Conference
September 28 LIRA 10.8 - seminar

Dear colleagues!

LIRA group of companies is welcoming you to take part in the following events:

  • September 26-27, 2018 Second International Scientific Conference "Modern methods of modeling and analysis of structures. Software for engineers and designers and its use in design and educational process". Invitation. Conference agenda.

  • September 28, 2018 Seminar on release of a new SP LIRA 10.8.

Seminar agenda


If you wish to participate in the seminar, you should register using the registration form provided below. The registration was extended until September 21, 2018.

No fee is charged for participation.


We are looking forward to seeing you on the 28th of September, 2018, at State Enterprise of the Ministry of Defence of Ukraine «Central Design Institute», 5A, Narodnoho Opolchennya St., Kyiv.

II international conference in Georgia «SEISMIC-2018»
7/10/2018 II international conference in Georgia «SEISMIC-2018»
LIRA group of companies took part in the proceedings of II international conference in Georgia «SEISMIC-2018»

LIRA group of companies took part in the II International Conference «Problems of seismic resistance in the protection of monuments of cultural heritage and civil engineering «SEISMIC-2018», which was held in Tbilisi (Georgia) from 30 June 2018 to 01 July 2018.

At the plenary session were presented the following reports:

Workshop "Application of SP LIRA 10.4 in structural design"
10/19/2015 Workshop "Application of SP LIRA 10.4 in structural design"
One-day workshop on the subject of "Application of SP LIRA 10.4 in structural design" will be held in Lviv on 23 October 2015.
One-day workshop on the subject of "Application of SP LIRA 10.4 in structural design" will be held in Lviv on 23 October 2015.



Venue: Lviv Polytechnic National University, "Building structures and bridges" department.
Address: Lviv, Karpins'koho Street 6, 2nd campus, room 223.

For participation in workshop it's necessary to register in any convenient way:
Registration of participants is necessary.
Participation is FREE of charge.
Workshop "Application of SP LIRA 10.4 in structural design"
10/1/2015 Workshop "Application of SP LIRA 10.4 in structural design"
Workshop on the subject of "Application of SP LIRA 10.4 in structural design" will be held in Almaty on 6 October 2015.
"Application of SP LIRA 10.4 in structural design"

Workshop on the subject of "Application of SP LIRA 10.4 in structural design" will be held in Almaty on 6 October 2015.


Venue: LLP DA "KAZGOR", FIREPLACE hall, 2nd floor.
Address: 81 Abylai Khan Ave, Almaty, 050000, Republic of Kazakhstan.

For participation in workshop it's necessary to register in any convenient way:
Registration of participants is necessary.
Participation is FREE of charge.
SP LIRA 10.4 at RAACS ("Zolotovskii readings")
6/24/2015 SP LIRA 10.4 at RAACS ("Zolotovskii readings")
Report "Implementation of finite elements with intermediate nodes on edges in SP LIRA 10.4" at RAACS ("Zolotovskii readings")
Report "Implementation of finite elements with intermediate nodes on edges in SP LIRA 10.4" at RAACS ("Zolotovskii readings")
LIRA 10.4 software was presented on the 24th of June 2015 at Russian Academy of Architecture and Construction Sciences (RAACS) at IV International scientific meeting "Problems and methods of computer-aided design of structures and buildings" ("Zolotovskii readings"). Conference has a great practical importance for building community. Scientific employees from various companies and organizations from Russia and other countries took part in the event. "LIRA soft" company was represented by "LIRA 10" project scientific coordinator Evzerov I.D., Doctor of Technical Science, and company's technical director Kolesnikov A.V. Subject of the report: "Implementation of finite elements with intermediate nodes on edges in SP LIRA 10.4".
Report addressed matters related to implementation and approbation of new finite elements. Benefits of such elements were displayed in a specific cases. The great number of improper utilization of finite elements exists in calculation practice. which leads to reproducibility. Given aspects were touched during pathological tests solving, where traditional finite elements (LIRA 9.4, 9.6, 10.0, 10.2) produce poor accuracy results. Utilization of finite elements with intermediate nodes on edges in LIRA 10.4 produces reasonably acceptable accuracy of the results.
Conference of ADN developers
2/2/2015 Conference of ADN developers
On 29th of December 2015 «LIRA soft» company took part in Autodesk DevDays 2014 conference of software developers for Autodesk.
On 29th of December 2015 «LIRA soft» company took part in Autodesk DevDays 2014 conference of software developers for Autodesk.

«LIRA soft» participants: Chernyushok Ivan («LIRA soft», Kyiv), Suvorov Roman («LIRA soft», Moscow), Kolesnikov Alexey («LIRA soft», Moscow).

Jim Quanci and ADN team (Autodesk Developer Network) presented interesting reports about new capabilities of Autodesk software and platforms, including mobile, cloud and desktop technologies. Jeremy Tammik has told about new capabilities of Autodesk Revit. AutoCAD and Revit new capabilities will allow LLC «LIRA soft» developers to improve interaction with Autodesk products.
«LIRA soft» company representatives and ADN team discussed the further collaboration in a field of our developments integration, particularly SP LIRA 10.4 and Autodesk Revit interaction. SP LIRA distribution package was published and may be downloaded from AUTODESK EXCHANGE APPS platform.
Webinar. New features SP LIRA 10.4
12/8/2014 Webinar. New features SP LIRA 10.4
Webinar dedicated to new capabilities and advantages of SP LIRA 10.4 will be held on 18th of December 2014 at 11 am Moscow time.
Webinar dedicated to new capabilities and advantages of SP LIRA 10.4 will be held on 18th of December 2014 at 11 am Moscow time.

Renewed SP LIRA 10.4 will significantly save time during creation, analysis and correction of information and design models and allows to increase the assessment of reliability of adopted structural concepts.
Executives and leading experts of Ltd «LIRA SOFT» will tell about advanced capabilities appeared in new version of the software.
Hosts:
Marchenko Dmitry Vladimirovich
Geraymovych Yury Dmitriyevich
Evzerov Isaak Danilovich
Kanev Danil Valerevich
On the webinar's programme:
  • Calculation and graphics environment of SP LIRA 10.4. New capabilities and advantages.
  • New computational processors: BRIDGE, Pushover Analysis. Intuitiveness of input data entry in LIRA 10.4 was improved, calculation accuracy was significantly increased, option of graphical analysis and calculation results documentation was added.
  • Finite elements library. New finite elements, which allows to increase problem solution accuracy.
  • Interaction capabilities between SP LIRA 10.4 and Revit Structure, as well as with other CAD and documentation systems.
Duration: 3 hours
Company "LIRA soft" took part in the research-to-practice seminar
12/3/2014 Company "LIRA soft" took part in the research-to-practice seminar
X United International research and practice seminar "Reliability and safety of buildings and structures upon seismic and emergency actions" was held on the 3rd of December 2014 at MSUCE.
X United International research and practice seminar "Reliability and safety of buildings and structures upon seismic and emergency actions" was held on the 3rd of December 2014 at MSUCE.
Report «Implementation of nonlinear static method (Pushover Analysis) in SP LIRA 10.4 according to "Construction in seismic regions" company standard» was introduced by software developers: project scientific coordinator Evzerov I.D., Doctor of Technical Science, and project technical manager Geraymovych Y.D., Candidate of Technical Science. Experts speech was welcomed with a profound interest be the audience.
Reports, represented at the seminar, and main matters of discussion will be published in scientific and technical journal «Vestnik MGSU», as well as will be posted on information and science press release of Science & Technology Council of MSUCE.
Seminar was held within the National Research Moscow State Institute of Civil Engineering development program and following the objectives of Federal Target Program "Improving stability of residential houses, main objects and life support systems in Russian Federation seismic regions for 2009-2018".
The formal presentation of the LIRA 10.4 software package was successful!
11/27/2014 The formal presentation of the LIRA 10.4 software package was successful!
The formal presentation of the LIRA 10.4 software package was held on the 18th of Novemver, 2014 at «Holiday Inn Sokolniki» hotel, Moscow.
The formal presentation of the new version of LIRA 10.4 software package, organized by «LIRA soft» company, was held on the 18th of Novemver, 2014 at «Holiday Inn Sokolniki» hotel, Moscow.
Event objective: introduce attendees - design engineers, structural analysts, project chief engineers - to the capabilities and advantages of the new version of SP LIRA 10.4, that will significantly save time during creation, analysis and correction of information and design models and allows to avoid possible errors by increasing the assessment of reliability of adopted structural concepts.
LIRA 10.x software package developers, users-practitioners, who already checked out capabilities and advantages of SP LIRA 10.2, and represenatives of expert community and specialist training facilities gathered at one stage to speak out.
In total over 40 designated companies took part in the event: CJSC «Gorproekt», OJSC «CNIIEP zhilischa», PA KAZGOR, LLC «IWC «BelEnergoStroy», LLC «Proektstroy», «MСC-Shaftproject», «VLI Vostok», «Mosgosekspertiza», «KIRBET» company and many others. The new 10.4 vesrion of SP generated a great interest among organizations, which do not use this software yet, but aiming to cutover to it.
«Lira soft» company executive director Dmitry Viktorovich Zhulkovsky opened the event with a welcome speech. «For now, the most important problem of increasing efficiency and competiveness of construction sector is reduction of expenses, which includes capital construction's object design. New SP LIRA 10.4 will help you to solve this problem.», Dmitry Viktorovich said. In his speech he not only emphasized audience's attention on the new SP LIRA 10.4, but listed advantages of all tenth generation of the software.
Dmitry Vladimirovich Marchenko, «LIRA 10.х» project technical manager and principal software engineer, who for over 15 years provides technical support of this product, starting with SP LIRA 5.02, gave the «SP LIRA 10.4 new capabilities» report. During his speech Dmitry Vladimirovich told about new capabilities and advantages of SP LIRA 10.4, while listing main innovations in the following systems:
  • «Bridge»
  • «Soil»
  • «Variation of models»
  • «PUSHOVER Analysis»
  • «Finite elements with intermediate nodes on edges»
  • «Reinforced concrete structures»
  • «Graphics system»
  • «Steel structures»
«SP LIRA 10.x» project scientific coordinator, mathematician, developer of the software's theoretical base, author of the finite element library and LIRA 5.01-9.6 computational processor, Evzerov Isaak Danilovich, Doctor of Technical Science, have told about new capabilities of SP LIRA 10.4 computational processor more precisely. He brought audience's attention to updated function «finite elements with intermediate nodes on edges». In the new version of SP LIRA 10.4 there were implemented new finite elements with intermediate nodes, which allow to obtain significantly better accuracy of the problem's solution compared to elements without intermediate nodes, while number of variables remains the same.
Project technical manager and principal software engineer, author and developer of LIRA 9.2-9.6 computational processor and specialized systems «Bridge», «Dynamics plus», «Assemblage» и «Variation of models», Yury Dmitriyevich Geraymovych followed with his own speech. In his report Yury Dmitriyevich talked about new life of «Bridge» system in more details. In renewed SP LIRA 10.4. intuitiveness of input data setting was improved, solution accuracy was drastically increased (factoring in track gauge of moving load ), graphical analysis and results documentation features were added..
As always, the speech of Guram Avtandilovich Dzhinchvelashvili, professor of the "Strength of Materials" department at Moscow State University of Civil Engineering (MSUCE), was deep and academically detailed. In his report «Structural seismic design using Pushover analysis method» Guram Avtandilovich talked in more details about capabilities of SP LIRA 10.4, which allows to evaluate behavior of the structure under seismic actions beyond the elastic limit - Pushover analysis method. This method connects bearing capacity, given as relationship between displacement of top of the structure and shear force in foundation, and seismic requirement given as a response spectrum. Intersection point of bearing capacity curve and response spectrum curve - dynamic equilibrium - is evaluated and it's used for evaluation of expected behavior of the structure.
The report «New capabilities of interaction between SP LIRA 10.4 and Revit Structure, as well as other CAD systems» by «LIRA soft» company technical director Alexey Viktorovich Kolesnikov generated a particular interest. In his speech Alexey Viktorovich made an emphasize on new capabilities of interaction between Autodesk Revit Structure and new SP LIRA 10.4, which allows to use Revit Structure analytical model as SP LIRA 10.4 design model for evaluation of design solutions reliability, followed by calculation results export into Revit Structure analytical model.
Leading design engineer of LLC «IWC «BelEnergoStroy» Alexey Nikolaevich Dvorak told about experience of SP LIRA 10.2 (previous generation of SP LIRA 10.x) use. He told about efficiency of SP LIRA 10.2 utilization as convenient design tool, using specific problem of three-hinged arch truss construction as an example.
«LIRA soft» company leading expert Kanev Danil Valerevich presented report «Advantages of model analysis using SP LIRA 10.2» from expertise's point of view and showed on which parameters the one should pay attention during analysis of the design model; touched on an issues of structural fracture resistance analysis; drew attention to how quickly detect errors in project using finished model; discussed standards of report, delivered to the expertise. Importance of performing such analysis was noticed by the experts.
Report by Drobot Dmitry Yurievich, LLC «Proektstroy» Chief Structural Engineer, on the subject «SP LIRA 10.4 – new computational capabilities as a combination of consistent and systematic steps on track to increase mechanical safety of building structures» gained audience's attention. Dmitry Yurievich is a long time LIRA 10.x admirer and he knows this software pretty well. Knowing all pros and cons of this software, he told, that , что as of today SP LIRA 10.4 is the most effective analysis tool, compared to similar software on the Russian market.
Report section ended with a speech by «LIRA soft» company business director Alexander Alexandrovich Maksimovskikh, who told about all additional capabilities presented by company for support of the new version of SP LIRA 10.4. The first one is training: thematic and original courses, travelling master classes and test drives, video tutorials and special programs for students. The second one is technical support of the software during learning and usage periods. The third one is system of configurations during SP LIRA 10.4 purchase, which allows users to purchase the part of SP LIRA 10.4, only modules that individually correspond to targeted problem and will effectively form user's analytical tool.
Topic regarding new capabilities of SP LIRA 10.4 was resumed at master classes, where all listeners took active participation. Developer's representative D.V. Marchenko, who knows all specifics and capabilities of the new version, and «LIRA soft» technical director A.V. Kolesnikov, who posses a long-term experience of working with «LIRA 10.х» software, illustrated dramatically parameter setting process, shared working experience on particular cases and told about nuances of work in new SP LIRA 10.4. A separate master class was held on the subject «Advantages of interaction between SP LIRA 10.4 and Autodesk Revit Structure» - it's the most actual topic as of today, especially to people, who use BIM-technologies in their toolkit.
Discussion between users and experts continued after the end of seminar's official part. During free intercourse, event's participants took part in test drive under the guidance by «LIRA soft» company's expert Suvorov Roman Nikolaevich, where evryone was given an opportunity to try out new SP LIRA 10.4.
Event ended on the high note, when «LIRA soft» company's executive director D.V. Zhulkovsky presented small rewards to the most active users of the tenth generation SP LIRA:
1. Dvorak Alexey Nikolaevich was honoured in the «The most devoted SP LIRA 10.х user» nomination.
2. Drobot Dmitry Yurievich was honoured in the «The most attentive SP LIRA 10.х user» nomination.
3. Nomination «The most active SP LIRA 10.х user» was rewarded to IFE MSUCE represented by Dzhinchvelashvili Guram Avtandilovich, professor of the «Strength of Materials» department.
4. Nomination «The most responsible SP LIRA 10.х user» was rewarded to Rusanova Elena Mikhaylovna, associate professor of the «Structural mechanics» department at MAMI, who helps developers to create guidance materials for students education.
5. Kolobov Vasily Vasilyevich, PA KAZGOR, Kazakhstan, was honoured in the «The most promising SP LIRA 10.х user» nomination.
Participants gave a warm responses regarding organization and execution of the event. Besides highly professional and interesting reports , relevant master classes and active test drives, every delegate took useful hand-outs with him - booklet with detailed description of all SP LIRA 10.4 innovations. And at the end of the event organizers prepared one more surprise – personal photo session for participants.
And the last what's been designed in terms of official introduction of new SP LIRA 10.4 is on-line presentation. Such format is designed for those people, who wanted to participate, but couldn't - primarily remote regions and neighboring countries. Specially for such listeners «LIRA soft» company arranged and carried out on-line presentation on the 25th of November, which gathered close to 130 listeners.

Photo report

On-line presentation of the new version SP LIRA 10.4.
11/20/2014 On-line presentation of the new version SP LIRA 10.4.
Online presentation of the new LIRA 10.4 software package will be held on the 25th of November
The formal presentation of the new SP LIRA 10.4 was held on the 18th of November and it attracted a lot of participants. However, a lot of people were willing to participate in presentation on 18th of November, but for a variety of reasons weren't able to do so.
Hence, «LIRA soft» company announces about repeated online presentation with all key speakers invited.
Online presentation will be held on the 25th of November at 11 am Moscow time.
Event programme

11.00 – 11.30
«SP LIRA 10.4 new features»
Marchenko Dmitry Vladimirovich, «LIRA 10.х» project technical director.

11.30 – 12.00
«SP LIRA 10.4 computational process new capabilities. New life of the BRIDGE system»
Geraymovych Yury Dmitriyevich, Candidate of Technical Sciences, «LIRA 10.х» project technical director.

12.00 – 12.15
«New capabilities of interaction between SP LIRA 10.4 and Revit Structure, as well as other CAD systems»
Kanev Danil Valerevich, «LIRA soft» company leading expert.

12.15-12.45
«Structural seismic design using Pushover analysis. Specifics of the analysis in SP LIRA 10.4»
Kolesnikov Aleksey Viktorovich, «LIRA soft» company technical director.

12.45 – 13.00
Feed back. Response to the questions
MSUCE, «Specialist's Day. Modern methods and technologies of structural design»
10/15/2014 MSUCE, «Specialist's Day. Modern methods and technologies of structural design»
We invite you to take part in the scientific seminar on the 28th of October 2014 at Moscow State University of Civil Engineering
Dear colleagues!
Research and practice seminar «Specialist's Day. Modern methods and technologies of structural design» will be held on the 28th of October 2014 at Moscow State University of Civil Engineering, at MOZOS's studio №9.
Seminar's organizers: Moscow State University of Civil Engineering (MSUCE), which provides engineer and scientific personnel training in Architecture and Construction, and «LIRA soft» company (Moscow), official representative of LIRA 9.6 and LIRA 10.x software developers, which were made for computer-aided design and analysis of buildings and structures.
Event objective: introduce attendees to recent development in a field of modern means of structural modeling, innovative technologies of structural design and evaluation of reliability of adopted structural concepts - LIRA 10.4 software package (SP LIRA 10.4), a part of SP LIRA tenth generation family, as for now the only domestic САЕ (Computer-Aided Engineering) software, which has complete integration with Revit Structure amd allows to optimize interacting process between design engineers and analysts of companies, that using Revit based BIM-technology as a main design environment.
«Specialist's Day at MSUCE» research and practice seminar's subject matter echos speech at Autodesk University Russia be MSUCE chancellor, professor Volkov Andrey Anatolevich, Doctor of Technical Science, RAACS corresponding member, in which he said that university needs to enter world ranks, and to do this - training of specialists, that operate with modern construction concepts such as BIM-technology, has to be started as we speak.
Among seminar's participants: leading experts of design engineers professional community, expertise and government entities representatives, SP LIRA 10.4 developers, MSUCE teaching staff and students.
Research and practice seminar's schedule assumes active involvement of audience in the discussion of pressing issues of modeling, structural strength analysis in SP LIRA 10.4 and free master classes (seminar's participants will receive «LIRA soft» company's certificates).
We're welcoming Your organization's experts - design engineers, structural analysts, project chief engineers, to take part in this seminar and utilize unique opportunity of communication with developers.
Research and practice seminar's schedule:
«Specialist's Day. Modern methods and technologies of structural design»
09:00-10:00
Registration of participants - Welcome coffee
Official part:
10:00-10:10
Research and practice seminar's participants welcome speech
10:10-10:25
«LIRA soft» company: prospects for collaboration»
Maksimovskikh Alexander Alexandrovich, «LIRA soft» marketing director
Research and practice part:
10:25-10:50
«Structural seismic design using finite element method software packages»
Professor Mkrtychev Oleg Vartanovich, Doctor of Technical Science
10:50-11:10
«Evolution of SP LIRA 10.4 computational processor»
«SP LIRA 10.x» project scientific coordinator, professor Evzerov Isaak Danilovich, Doctor of Technical Science
11:10-11:30
«Analysis of various storied buildings on steel rubber bearings under seismic actions»
Professor Dzhinchvelashvili Guram Avtandilovich, Candidate of Technical Science
11:30-12:30
«Modern methods of structural modeling and analysis using SP LIRA 10.2»
Kolesnikov Aleksey Viktorovich, technical director of «LIRA soft» company
12:30-13:00
«Discussion: the discussion about pressing issues of structural modeling and analysis »
13:00-13:30
Lunch break
Teaching part. «Master classes from developers:»
13:30-14:30
«Modern methods of structural modeling and analysis using SP LIRA 10.2»
Marchenko Dmitry Vladimirovich, «LIRA 10.х» project technical director
14:30-15:05
«SP LIRA 10.2 usage experience at CRI-housing and industrial buildings design»
Boukreev Mikhail Aleksandrovich, LLC "Moscow design bureau", main expert
15:05-16:00
«Architectural elements implementation and utilization specifics in SP LIRA 10.2»
Kolesnikov Aleksey Viktorovich, technical director of «LIRA soft» company
16:00-16:20
«Discussion: the discussion about practical issues of structural analysis SP LIRA 10.2»
16:20-16:30
Official closing and wrap-up of research and practice seminar
XII international research-to-practice conference in Odessa
8/8/2014 XII international research-to-practice conference in Odessa
During 14th-18th of September, 2014 XII international research-to-practice conference «Innovative service time technologies of civil, industrial and transport objects»
During 14th-18th of September, 2014 XII international research-to-practice conference «Innovative service time technologies of civil, industrial and transport objects» will be held in Odessa.
Representatives of international scientific community, company's research units, industry and business of Russia and Ukraine, development institutes and state authorities will take part in prestigious scientific and technical conference, which is dedicated to innovative technologies in building and transport industries and focused on scientific research and industrial activity experience exchange in the field of main thematic scope.
Invited and contest reports, as well as open discussions, will be included into conference schedule. Mathematician Evzerov I.D., Doctor of Technical Science, and Geraymovich Y.D., Candidate of Technical Science, (LLC «PRIMECAD», Kyiv, Ukraine) will take part in «Information technologies of design and analysis in construction industry» section work with the «Review of seismic design capabilities in LIRA 10.2 software package» report. In theirs report authors bring forward a review of computational methods for seismic actions, which are implemented in LIRA 10.2 software package: expansion by natural mode shapes and forth integration.
Note, that event takes place with the aid of Ministry for education and science, Academy of Sciences of the Ukraine, Academy of construction of Ukraine, Academy of transport of Ukraine with contributions from Prydniprovska State Academy of Civil Engineering and Architecture, Dnipropetrovsk National University of Rail Transport, Crimean national academy of environmental and resort construction.
Main thematic scopes of the conference: theoretical basics of construction; innovative technologies; new materials in modern construction and transport; energy performance in housing and municipal infrastructure; diagnostics and evaluation of technical condition of housing and public, industrial and transport constuction objects; information technologies of design and analysis in construction industry; seminar and master classes for young researchers and a host of other things.
V International symposium (Irkutsk)
8/4/2014 V International symposium (Irkutsk)
"LIRA soft" company took part in V International symposium «Pressing issues of computer-aided design of structures and buildings»
"LIRA soft" company took part in V International symposium «Pressing issues of computer-aided design of structures and buildings».
"LIRA soft" experts took part in V International symposium «Pressing issues of computer-aided design of structures and buildings», which was held from the 1st till the 6th of July in Irkutsk under the guidance of Russian Academy of Architecture and Construction Sciences. 114 representatives of various businesses and organizations took part in prestigious forum at the premises of FSBEI "Irkutsk State Technical University". Symposium's schedule included plenary and sectional speeches of academic institute's and HEI's scientists, experts, who are dealing with engineering design, as well as developers of the software for engineering analysis, Round tables activity regarding discussion of the pressing issues and achivements in the field of computer-aided design of structures and buildings. For example, speeches, which highlighted modern simulation techniques of construction objects at all stages of its service life and analytical calculations with the application of modern software intended for simulation of behavior of structures, received close attention.
Antiseismic construction issues drew particular interest. Given subject matter became essential due to active reclamation of earthquake endangered areas. For example, speeches of professor Mkrtychev O.V, Doctor of Technical Science, and professor Dzhinchvelashcvili G.A, Candidate of Technical Sciences, in cooperation with "LIRA soft" company's main expert Kolesnikov A.V., have told about crisis in structural design codes regarding antiseismic construction, about their changes and additions.
MSUCE organization's standard for antiseismic construction, which is implemented in SP LIRA 10.2, also was talked about. Scientific coordinator of LIRA 10.x project, co-author of LIRA 5.01 -9.6, 10.0, 10.2 computational processor, Evzerov I.D, Doctor of Technical Science, has told about SP LIRA 10.2 computational processor new capabilities, which allows to perform postbucking analysis i.e. analysis after buckling failure in geometrically nonlinear formulation with an automatic search of new equilibrium shapes.
In «Seismic design of structures and buildings using SP LIRA 10.2» report by "LIRA soft" company's main expert Kolesnikov A.V., main innovations of LIRA 10.2 software package regarding dynamics analysis, seismic actions included, were displayed.
Symposium's participants worked at five sections during the week:
  • SECTION 1. Issues of computer-aided design of structures and buildings
  • SECTION 2. Computer aided software packages in building industry. Structural design;
  • SECTION 3. Theoretical basics of computer-aided design of structures and buildings;
  • SECTION 4. Materials and structures under transient conditions. Dynamics of damaged structures;
  • SECTION 5. Structural design optimization issues.

Photo report

The 43rd CJSC «ASPO» International workshop completed
6/5/2014 The 43rd CJSC «ASPO» International workshop completed
The 43rd regular CJSC «ASPO» International workshop was held in Saint Petersburg from the 27th till the 30th of May 2014.
The 43rd regular CJSC «ASPO» International workshop was held in Saint Petersburg from the 27th till the 30th of May 2014. 61 people from 8 cities and 18 organizations of Russian Federation have taken part in workshop events. Plenary meeting and Round table were dedicated to problems of introduction and practical application of information technologies to engineering design of industrial and civil construction objects.
«ASPO» director Berezin Jacov Abramovich opened two-day workshop by sharing about problems in computer-aided design field. Developers of the most common software in Russia also have spoken. Roundtable discussion gave an opportunity for design engineers, that arrived to the workshop, to communicate. Delegates shared their own problems in design management field.
Workshop's schedule included demonstration of simulation software. The second day of the workshop started with «LIRA soft» chief expert Alexey Kolesnikov's speech on the following topic: «The new in SP LIRA 10.2: punching shear calculation, seismic actions, nonlinearity». Upon speech completion, many questions were asked, which were answered in detail by Alexey. In a latter half of a day, test-drive of new version of SP LIRA 10.2 was held within worksop. All workshop participants were given an opportunity to test SP LIRA by their own, as well as to consult a «LIRA soft» experts regarding new capabilities of the program. Evzerov Isaac Danilovich, Doctor of Technical Science, SP «LIRA», scientific coordinator of LIRA 10.x project, resumed the introduction to the tenth generation of SP LIRA with the speech on the following topic: «The new capabilities of SP LIRA 10.x computational processor».
On the workshop's closing day, developers of software for operational management of engineering company, as well as automation aids, workflow and electronic archives.
Traditional sightseeing part of the workshop with Timofey Zhivotovskiy was help in Dvortsovo - garden ensemble of the Pavlovsk town, where, despite unfavorable weather, it was managed to get a sight of architectural landmarks, alley of ancient trees and to catch a story about Pavlovsk palace creation.
November 28 - online presentation (webinar)
11/6/2013 November 28 - online presentation (webinar)
«Version 10.2. The fifth chapter in LIRA software package evolution»
«Version 10.2. The fifth chapter in LIRA software package evolution»
Due to the fact that long-awaited LIRA 10.2 release has occured, LIRA-soft company welcomes you to take part in our developers' webinar «Version 10.2. The fifth chapter in LIRA software package evolution».

SP LIRA 10.2 is a completely new product of a new generation, which combines steady quality and convenience of SP LIRA with the latest programming methods and techniques. Given version intended for making the work with SP LIRA even simpler and effective and that's why developers are sure that all users will appreciate the whole variety of SP LIRA 10.2 features.
During presentation you'll be introduced to main innovations and specifics of the new version, such as (more than 50 innovations and improvements in total):
  • SOIL module;
  • VARIATION OF MODELS module;
  • Operations with architectural primitives (plate, line);
  • Composite steel sections;
  • Punching calculation for slabs;
  • Interaction between SP LIRA and Autodesk Revit Structure 2014.
Besides that, online presentation participants will have an opportunity to submit their point of interest directly to LIRA software package developers.
Presentation schedule:
  • Welcome speech from LIRA Soft (Kyiv) representative Ludmila Skachkova, director of LIRA Soft (Kyiv);
  • «New features of SP LIRA version 10.2» speech by Dmitry Marchenko, «LIRA 10» technical project manager.